GE Fanuc|IC695CPL410-AAAC|CPE310 Controller

The IC695CPL410-AAAC  is a CPU module in the GE Fanuc PACSystem RX3i Series, designed to perform real-time control of machines, processes, and material handling systems. It communicates with I/O and Intelligent Option modules over a dual-purpose PCI and serial backplane.

• Processor: 1.1 GHz Atom processor
• Memory: 10 MB
• Embedded Ethernet: Two connections rated for 10Mb/sec and 100Mb/sec
• Serial Ports: RS-485 and RS-232
• Program Blocks: Up to 512 blocks, each up to 128 KB
• Supported Protocols: Modbus RTU Slave, SNP, Serial I/O
• Programming Languages: Ladder Diagram, Structured Text, C, Function Block Diagram
• LED Indicators: Green, red, off, or blinking for efficient troubleshooting and status verification
• Installation: Can be installed in any pair of slots in the main RX3i controller rack except for the two highest-numbered slots
• Upgrade: Approximately three times faster than the 300 MHz Celeron processor in the IC695CPU310; legacy PME software compatible
• Note: The RS-232 port on the IC695CPE310 does not provide 5V power on pin 5

Technical Specifications

• Processing Speed: 1.1 GHz
• CPU Memory: 10 MB
• Floating Point: Yes
• Power Requirements:
  • 3.3 VDC: 1 Amp
  • 5 VDC: 1 Amp
  • 24 VDC: 0.5 Amp
• Serial Protocols:
  • Modbus RTU Slave
  • SNP Slave
  • Serial I/O
• Embedded Communications:
  • RS-232
  • RS-485
• Real-Time Clock: Battery-backed with dynamic data backup
• USB Interface: 1x USB-A 2.0 master port for configuration and application data download
• Ethernet Connections: 2 ports, 10/100 Mbps
• Environmental:
  • Operating Temperature: 0 to 60°C (32 to 140°F)

Installation and Usage

• Backplane: Must be installed in the central universal backplane of the RX3i PACSystems machine control system
• Unsupported Backplanes: Cannot function properly if installed in an expansion backplane or a remote backplane