Yokogawa|ANB10N-410/CU2T/NDEL|ESB Bus Node Unit
YOKOGAWA ANB10N-410/CU2T/NDEL ESB Bus Node Unit
Description
YOKOGAWA ANB10N-410/CU2T/NDEL is a single non-redundant ESB (Ethernet Switch Bus) node unit for the CENTUM VP distributed control system, intended for standard industrial use without local display or explosion protection.
Features
- Single ESB communication port
- No local display function (NDEL)
- Standard temperature operation
- DIN rail or rack mountable
Technical Specifications
- Model series: ANB10N indicates non-redundant ESB node architecture
- Suffix 410 specifies: non-hazardous area use, operating temperature range 0 °C to 50 °C, and 100–120 VAC power input
- Power supply: 100–120 VAC, 50/60 Hz
- Operating temperature: 0 °C to 50 °C
- Storage temperature: -40 °C to +85 °C
- Humidity: ≤90% RH (non-condensing)
- Protection rating: IP20
- ESB interface: 100BASE-TX Ethernet via RJ45 connector
- Data transmission rate: 100 Mbps full duplex
- Maximum I/O modules per node: 13
- Ready contact output: 1 Form C relay, rated 30 VDC / 0.3 A
- Connector type: /CU2T denotes standard ESB terminal block for twisted-pair cabling
- NDEL suffix: No display or operator interface
- Dimensions: Approximately 25 mm (W) × 190 mm (H) × 170 mm (D)
- Weight: Approximately 0.75 kg
Yokogawa|ANB10N-410/CU2T/NDEL|ESB Bus Node Unit
Yokogawa|ANB10N-410/CU2T/NDEL|ESB Bus Node Unit
YOKOGAWA ANB10N-410/CU2T/NDEL ESB Bus Node Unit
Description
YOKOGAWA ANB10N-410/CU2T/NDEL is a single non-redundant ESB (Ethernet Switch Bus) node unit for the CENTUM VP distributed control system, intended for standard industrial use without local display or explosion protection.
Features
- Single ESB communication port
- No local display function (NDEL)
- Standard temperature operation
- DIN rail or rack mountable
Technical Specifications
- Model series: ANB10N indicates non-redundant ESB node architecture
- Suffix 410 specifies: non-hazardous area use, operating temperature range 0 °C to 50 °C, and 100–120 VAC power input
- Power supply: 100–120 VAC, 50/60 Hz
- Operating temperature: 0 °C to 50 °C
- Storage temperature: -40 °C to +85 °C
- Humidity: ≤90% RH (non-condensing)
- Protection rating: IP20
- ESB interface: 100BASE-TX Ethernet via RJ45 connector
- Data transmission rate: 100 Mbps full duplex
- Maximum I/O modules per node: 13
- Ready contact output: 1 Form C relay, rated 30 VDC / 0.3 A
- Connector type: /CU2T denotes standard ESB terminal block for twisted-pair cabling
- NDEL suffix: No display or operator interface
- Dimensions: Approximately 25 mm (W) × 190 mm (H) × 170 mm (D)
- Weight: Approximately 0.75 kg
