Yokogawa|ANB10D-410/CU2N/NDEL S1|ESB Bus Node Unit
YOKOGAWA ANB10D-410/CU2N/NDEL S1 ESB Bus Node Unit
Description
YOKOGAWA ANB10D-410/CU2N/NDEL S1 is a single ESB (Ethernet Switch Bus) node unit for CENTUM VP systems, configured for standard industrial use without explosion protection or display.
Features
- Single ESB communication port
- No display function (NDEL = No Display)
- Standard temperature operation
- Compatible with CENTUM VP R5.0 and later
Technical Specifications
- Model suffix 410 indicates: non-explosion-proof, standard temperature range (0 °C to 50 °C), and 100–120 VAC power supply
- Power input: 100–120 VAC, 50/60 Hz
- Operating temperature: 0 °C to 50 °C
- Storage temperature: -40 °C to +85 °C
- Humidity: ≤90% RH (non-condensing)
- Protection rating: IP20
- ESB interface: 100BASE-TX Ethernet via RJ45 connector
- Data rate: 100 Mbps full duplex
- Maximum I/O modules per node: 13
- Ready contact output: 1 Form C relay, rated 30 VDC / 0.3 A
- Connector unit: /CU2N denotes standard ESB bus connector for shielded twisted-pair cabling
- NDEL suffix: No local display or operator interface
- S1 suffix: Base hardware revision with standard firmware support
- Dimensions: Approx. 25 mm (W) × 190 mm (H) × 170 mm (D)
- Weight: Approximately 0.8 kg
Yokogawa|ANB10D-410/CU2N/NDEL S1|ESB Bus Node Unit
Yokogawa|ANB10D-410/CU2N/NDEL S1|ESB Bus Node Unit
YOKOGAWA ANB10D-410/CU2N/NDEL S1 ESB Bus Node Unit
Description
YOKOGAWA ANB10D-410/CU2N/NDEL S1 is a single ESB (Ethernet Switch Bus) node unit for CENTUM VP systems, configured for standard industrial use without explosion protection or display.
Features
- Single ESB communication port
- No display function (NDEL = No Display)
- Standard temperature operation
- Compatible with CENTUM VP R5.0 and later
Technical Specifications
- Model suffix 410 indicates: non-explosion-proof, standard temperature range (0 °C to 50 °C), and 100–120 VAC power supply
- Power input: 100–120 VAC, 50/60 Hz
- Operating temperature: 0 °C to 50 °C
- Storage temperature: -40 °C to +85 °C
- Humidity: ≤90% RH (non-condensing)
- Protection rating: IP20
- ESB interface: 100BASE-TX Ethernet via RJ45 connector
- Data rate: 100 Mbps full duplex
- Maximum I/O modules per node: 13
- Ready contact output: 1 Form C relay, rated 30 VDC / 0.3 A
- Connector unit: /CU2N denotes standard ESB bus connector for shielded twisted-pair cabling
- NDEL suffix: No local display or operator interface
- S1 suffix: Base hardware revision with standard firmware support
- Dimensions: Approx. 25 mm (W) × 190 mm (H) × 170 mm (D)
- Weight: Approximately 0.8 kg
