Yokogawa|ADM51T|Contact Output Module
Yokogawa ADM51T Contact Output Module
Description
The Yokogawa ADM51T is a 16-point terminal-type contact output module designed for CENTUM CS3000 DCS systems to control external relays and indicators.
The Yokogawa ADM51T is a 16-point terminal-type contact output module designed for CENTUM CS3000 DCS systems to control external relays and indicators.
Features
Relay contact output configuration
High switching capacity
Individual channel status LEDs
Terminal block wiring interface
Relay contact output configuration
High switching capacity
Individual channel status LEDs
Terminal block wiring interface
Technical Specifications
- Output Points: 16 independent relay channels
- Output Type: Form C (SPDT) relay contacts
- Maximum Switching Voltage: 250 V AC or 30 V DC
- Maximum Switching Current: 2 A per point common limit
- Total Common Current: Maximum 8 A per common group
- Minimum Load: 10 mV DC at 1 mA for reliable contact operation
- Mechanical Life: Approximately 20 million operations at no load
- Electrical Life: Approximately 100,000 operations at rated resistive load
- Response Time: Typical operate time of 10 ms and release time of 5 ms
- Insulation Resistance: Greater than 100 M Ohm at 500 V DC
- Dielectric Strength: 2300 V AC for 1 minute between terminals and ground
- Operating Temperature: Range from -20 to +60 degrees Celsius
- Humidity Range: 5 to 95 percent relative humidity non-condensing
- Weight: Approximate unit weight of 250 grams including terminals
Yokogawa|ADM51T|Contact Output Module
Current product
Current
Vendor:
Yokogawa
Yokogawa|ADM51T|Contact Output Module
Regular price
$210.00
Sale price
$210.00
Regular price
$510.00
Options
Descriptions
Yokogawa ADM51T Contact Output Module
Description
The Yokogawa ADM51T is a 16-point terminal-type contact output module designed for CENTUM CS3000 DCS systems to control external relays and indicators.
The Yokogawa ADM51T is a 16-point terminal-type contact output module designed for CENTUM CS3000 DCS systems to control external relays and indicators.
Features
Relay contact output configuration
High switching capacity
Individual channel status LEDs
Terminal block wiring interface
Relay contact output configuration
High switching capacity
Individual channel status LEDs
Terminal block wiring interface
Technical Specifications
- Output Points: 16 independent relay channels
- Output Type: Form C (SPDT) relay contacts
- Maximum Switching Voltage: 250 V AC or 30 V DC
- Maximum Switching Current: 2 A per point common limit
- Total Common Current: Maximum 8 A per common group
- Minimum Load: 10 mV DC at 1 mA for reliable contact operation
- Mechanical Life: Approximately 20 million operations at no load
- Electrical Life: Approximately 100,000 operations at rated resistive load
- Response Time: Typical operate time of 10 ms and release time of 5 ms
- Insulation Resistance: Greater than 100 M Ohm at 500 V DC
- Dielectric Strength: 2300 V AC for 1 minute between terminals and ground
- Operating Temperature: Range from -20 to +60 degrees Celsius
- Humidity Range: 5 to 95 percent relative humidity non-condensing
- Weight: Approximate unit weight of 250 grams including terminals
