Honeywell FC-TDOL-0724 CC V1.0 Field Termination Assembly
Designed for discrete output relay execution in Safety Manager control architectures, the Honeywell FC-TDOL-0724 CC V1.0 field termination assembly provides direct electrical execution across safety instrumented output loops. It manages relay switching operations at 24 VDC with channel current limits up to 250 mA, bridging system I/O modules with critical field actuators.
Electrical Isolation And Switching Performance
The assembly implements strict electrical isolation barriers across individual relay output paths to suppress common-mode noise and prevent cross-talk between safety loops. Its physical layout is engineered to ensure stable switching transitions for discrete safety interlocks. Additionally, adjacent terminal blocks accommodate standard loop integration requirements when configured within comprehensive process control panels.
Field Installation Guidelines
- Ensure all system power supplies and external loop voltages are completely switched off and locked out before handling or installing the termination assembly.
- Mount the unit securely onto the designated DIN rail or mounting plate within the safety cabinet enclosure.
- Terminate field actuator wiring and controller interface cables securely to the respective screw terminals, maintaining correct polarity.
- Verify circuit continuity and insulation resistance parameters before energizing the safety loop.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | FC-TDOL-0724 CC V1.0 |
| Brand | Honeywell |
| Input Voltage / Power | 24 VDC loop powered |
| Channel Current Rating | 250 mA max |
| Mounting Type | DIN-rail mount termination form factor |
| Compliance | Standard industrial ambient range |
Frequently Asked Questions
Q: Does the FC-TDOL-0724 CC V1.0 assembly support hot-swapping under power?
A: Hot-swapping field wiring on the termination assembly is restricted; loop power must be isolated and disconnected prior to servicing or replacing connected field devices to prevent arcing or unintended output activation.
Q: What are the primary electrical voltage and current limits supported by this termination unit?
A: The module is engineered for 24 VDC control circuits, accommodating a maximum continuous current rating of 250 mA per channel across its integrated relay output channels.
Honeywell FC-TDOL-0724 CC V1.0 Field Termination Assembly
Honeywell FC-TDOL-0724 CC V1.0 Field Termination Assembly
Designed for discrete output relay execution in Safety Manager control architectures, the Honeywell FC-TDOL-0724 CC V1.0 field termination assembly provides direct electrical execution across safety instrumented output loops. It manages relay switching operations at 24 VDC with channel current limits up to 250 mA, bridging system I/O modules with critical field actuators.
Electrical Isolation And Switching Performance
The assembly implements strict electrical isolation barriers across individual relay output paths to suppress common-mode noise and prevent cross-talk between safety loops. Its physical layout is engineered to ensure stable switching transitions for discrete safety interlocks. Additionally, adjacent terminal blocks accommodate standard loop integration requirements when configured within comprehensive process control panels.
Field Installation Guidelines
- Ensure all system power supplies and external loop voltages are completely switched off and locked out before handling or installing the termination assembly.
- Mount the unit securely onto the designated DIN rail or mounting plate within the safety cabinet enclosure.
- Terminate field actuator wiring and controller interface cables securely to the respective screw terminals, maintaining correct polarity.
- Verify circuit continuity and insulation resistance parameters before energizing the safety loop.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | FC-TDOL-0724 CC V1.0 |
| Brand | Honeywell |
| Input Voltage / Power | 24 VDC loop powered |
| Channel Current Rating | 250 mA max |
| Mounting Type | DIN-rail mount termination form factor |
| Compliance | Standard industrial ambient range |
Frequently Asked Questions
Q: Does the FC-TDOL-0724 CC V1.0 assembly support hot-swapping under power?
A: Hot-swapping field wiring on the termination assembly is restricted; loop power must be isolated and disconnected prior to servicing or replacing connected field devices to prevent arcing or unintended output activation.
Q: What are the primary electrical voltage and current limits supported by this termination unit?
A: The module is engineered for 24 VDC control circuits, accommodating a maximum continuous current rating of 250 mA per channel across its integrated relay output channels.
