Allen-Bradley 1783-MS06T Managed Ethernet Switch
Configured for high-performance network management in Allen-Bradley Stratix 8000 systems, the Allen-Bradley 1783-MS06T (1783-MS06T Layer 2 Managed Switch) provides direct physical/electrical execution. It handles deterministic packet switching, VLAN segmentation, and network redundancy across 6 copper ports and 2 dual-purpose SFP uplink slots.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 1783-MS06T |
| Brand | Allen-Bradley |
| Origin | USA |
| Weight | 9.48 lbs (4.30 kg) |
| Dimensions | Standard DIN-rail modular switch chassis |
| Operating Temp | -40 to 60 deg C |
| Power Consumption | 2 A at 18 to 60 VDC |
| Number of Ports | 6 Copper Ports, 2 Dual-Purpose Ports (RJ45 or SFP) |
| Network Layer | Layer 2 Managed Switch |
| Mounting Type | DIN Rail Mount |
| Subsystem Type | Industrial Managed Switch |
Deterministic Networks and EtherNet/IP Protocol Execution
The 1783-MS06T incorporates Cisco technology integration to deliver high-speed backplane bus communication velocity and total deterministic network performance across complex industrial architectures. Built-in EtherNet/IP CIP management capabilities allow seamless integration into Studio 5000 diagnostic dashboards, enabling real-time port status tracking and hardware alarms. Integrated Quality of Service (QoS) prioritization and IEEE 1588 Precision Time Protocol (PTP) support eliminate network jitter, maintaining precise timing synchronization for motion control and high-density I/O traffic.
Frequently Asked Questions
Q: What are the dual-purpose ports on the 1783-MS06T and how do they operate?
A: The two dual-purpose ports each consist of a 10/100/1000 copper RJ45 port and an SFP module slot. Only one media interface (copper or SFP fiber) per dual-purpose pair can be active at a time.
Q: What power input range is required to operate the 1783-MS06T?
A: The switch requires an input supply of 18 to 60 VDC drawing up to 2 A, supporting redundant power terminal connections for continuous operational uptime.
Field Installation Guidelines
- DIN Rail Mounting: Securely latch the 1783-MS06T onto a heavy-duty 35 mm DIN rail in a protective enclosure. Ensure vertical thermal clearance above and below the module to facilitate natural convection cooling.
- Power Cabling: Connect dual DC power feeds from independent 24 VDC or 48 VDC industrial power supplies to the removable terminal block to ensure power redundancy.
- Earthing and Shielded Wiring: Attach a dedicated grounding wire from the module ground lug directly to the cabinet main earth bar. Use Category 5e or Category 6 STP (Shielded Twisted Pair) cables to prevent industrial EMI corruption.
Allen-Bradley 1783-MS06T Managed Ethernet Switch
Allen-Bradley 1783-MS06T Managed Ethernet Switch
Configured for high-performance network management in Allen-Bradley Stratix 8000 systems, the Allen-Bradley 1783-MS06T (1783-MS06T Layer 2 Managed Switch) provides direct physical/electrical execution. It handles deterministic packet switching, VLAN segmentation, and network redundancy across 6 copper ports and 2 dual-purpose SFP uplink slots.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 1783-MS06T |
| Brand | Allen-Bradley |
| Origin | USA |
| Weight | 9.48 lbs (4.30 kg) |
| Dimensions | Standard DIN-rail modular switch chassis |
| Operating Temp | -40 to 60 deg C |
| Power Consumption | 2 A at 18 to 60 VDC |
| Number of Ports | 6 Copper Ports, 2 Dual-Purpose Ports (RJ45 or SFP) |
| Network Layer | Layer 2 Managed Switch |
| Mounting Type | DIN Rail Mount |
| Subsystem Type | Industrial Managed Switch |
Deterministic Networks and EtherNet/IP Protocol Execution
The 1783-MS06T incorporates Cisco technology integration to deliver high-speed backplane bus communication velocity and total deterministic network performance across complex industrial architectures. Built-in EtherNet/IP CIP management capabilities allow seamless integration into Studio 5000 diagnostic dashboards, enabling real-time port status tracking and hardware alarms. Integrated Quality of Service (QoS) prioritization and IEEE 1588 Precision Time Protocol (PTP) support eliminate network jitter, maintaining precise timing synchronization for motion control and high-density I/O traffic.
Frequently Asked Questions
Q: What are the dual-purpose ports on the 1783-MS06T and how do they operate?
A: The two dual-purpose ports each consist of a 10/100/1000 copper RJ45 port and an SFP module slot. Only one media interface (copper or SFP fiber) per dual-purpose pair can be active at a time.
Q: What power input range is required to operate the 1783-MS06T?
A: The switch requires an input supply of 18 to 60 VDC drawing up to 2 A, supporting redundant power terminal connections for continuous operational uptime.
Field Installation Guidelines
- DIN Rail Mounting: Securely latch the 1783-MS06T onto a heavy-duty 35 mm DIN rail in a protective enclosure. Ensure vertical thermal clearance above and below the module to facilitate natural convection cooling.
- Power Cabling: Connect dual DC power feeds from independent 24 VDC or 48 VDC industrial power supplies to the removable terminal block to ensure power redundancy.
- Earthing and Shielded Wiring: Attach a dedicated grounding wire from the module ground lug directly to the cabinet main earth bar. Use Category 5e or Category 6 STP (Shielded Twisted Pair) cables to prevent industrial EMI corruption.
