Schneider |170DNT11000| PROFIBUS DP Communications Adapter
Description
The 170 DNT 11000 is a PROFIBUS DP communications adapter that connects Schneider Electric’s Momentum I/O modules to a PROFIBUS DP network, enabling decentralized control and reliable data exchange.
Features
- Converts Momentum I/O bases into PROFIBUS DP slaves
- Supports cyclic and non-cyclic data transfer modes
- Includes address switches (1–99) for device identification
- LED status indicator (BF = Bus Fault) for diagnostics
- Requires GSD file (ASA_7512.GSD) for configuration
Technical Specifications
PROFIBUS DP Interface
- Protocol: PROFIBUS DP per EN 50170 (DIN 19245)
- Data Rates: 9.6 kbps to 12 Mbps
- Cable Length: 100 m at 12 Mbps, 1,200 m at 93.75 kbps
- Isolation: RS-485 to logic (2.5 kV)
Power
- Supply: 5 VDC (from I/O base)
- Current Consumption: 250 mA
- Power Dissipation: 1.2 W (typical)
Network Limits
- Max Devices: 125 on network, 32 per segment
- I/O Data: Up to 244 bytes per slave
Environmental
- Operating Temperature: 0°C to 60°C
- Protection: IP20 (for enclosed cabinet mounting)
Diagnostics
- 19-byte diagnostic message (station status, I/O errors, ident codes)
- Watchdog Timer for master communication monitoring (configurable DCT)
Compatibility
- Works with all Momentum I/O bases (discrete, analog, mixed)
- Unique Ident Codes per I/O base (e.g., E0 02 for 170 AMM 090 00)
Ordering Information
- Adapter: 170 DNT 110 00
- GSD File: 381 SWA 000 00
- Connectors:
- 490 NAD 911 03 (terminating)
- 490 NAD 911 04/05 (node)
Safety
- For use by qualified personnel only
- Ground shields according to EMC guidelines
- Terminate bus ends using 490 NAD 911 03
Schneider |170DNT11000| PROFIBUS DP Communications Adapter
المنتج الحالي
حاضِر
بائع:
SCHNEIDER
Schneider |170DNT11000| PROFIBUS DP Communications Adapter
سعر عادي
$200.00
سعر البيع
$200.00
سعر عادي
$380.00
خيارات
الأوصاف
Description
The 170 DNT 11000 is a PROFIBUS DP communications adapter that connects Schneider Electric’s Momentum I/O modules to a PROFIBUS DP network, enabling decentralized control and reliable data exchange.
Features
- Converts Momentum I/O bases into PROFIBUS DP slaves
- Supports cyclic and non-cyclic data transfer modes
- Includes address switches (1–99) for device identification
- LED status indicator (BF = Bus Fault) for diagnostics
- Requires GSD file (ASA_7512.GSD) for configuration
Technical Specifications
PROFIBUS DP Interface
- Protocol: PROFIBUS DP per EN 50170 (DIN 19245)
- Data Rates: 9.6 kbps to 12 Mbps
- Cable Length: 100 m at 12 Mbps, 1,200 m at 93.75 kbps
- Isolation: RS-485 to logic (2.5 kV)
Power
- Supply: 5 VDC (from I/O base)
- Current Consumption: 250 mA
- Power Dissipation: 1.2 W (typical)
Network Limits
- Max Devices: 125 on network, 32 per segment
- I/O Data: Up to 244 bytes per slave
Environmental
- Operating Temperature: 0°C to 60°C
- Protection: IP20 (for enclosed cabinet mounting)
Diagnostics
- 19-byte diagnostic message (station status, I/O errors, ident codes)
- Watchdog Timer for master communication monitoring (configurable DCT)
Compatibility
- Works with all Momentum I/O bases (discrete, analog, mixed)
- Unique Ident Codes per I/O base (e.g., E0 02 for 170 AMM 090 00)
Ordering Information
- Adapter: 170 DNT 110 00
- GSD File: 381 SWA 000 00
- Connectors:
- 490 NAD 911 03 (terminating)
- 490 NAD 911 04/05 (node)
Safety
- For use by qualified personnel only
- Ground shields according to EMC guidelines
- Terminate bus ends using 490 NAD 911 03
