GE Fanuc|IS215UCCAM03A|Analog I/O Module
GE Fanuc IS215UCCAM03A Analog I/O Module
Description
The GE Fanuc IS215UCCAM03A is an analog input/output module designed for use in GE’s Mark V turbine control systems.
Features
- Supports multiple analog signal types
- Interfaces with terminal boards via standardized connectors
- Configurable via onboard hardware jumpers
Technical Specifications
- Manufacturer: GE Fanuc
- Model Number: IS215UCCAM03A
- Series: Mark V
- Module Type: Analog I/O (TCQA board)
- Signal Types Handled: LVDT inputs, servo valve outputs, thermocouple inputs, 4–20 mA inputs/outputs, vibration inputs, relay driver outputs, pulse inputs, voltage inputs, generator and line signals
-
Connector Interfaces:
- 3PL: Data bus linking STCA, TCQA, and TCQE boards
- JE: Transfers generator/line signals and servo valve outputs to/from TCQC board
- JB: Carries 4–20 mA signals to/from TBQC terminal board
- JF: Receives LVDT/LVDR position inputs from TBQC JFR
- JG: Accepts ±10 V DC and vibration inputs from TBQB JGR
-
Jumper Configurations:
- J1/J2: Select milliamp output circuit
- J5/J6: Set output current range (20 mA or 200 mA)
- J7: Enable RS232 port for board testing
- J8: Activate oscillator
GE Fanuc|IS215UCCAM03A|Analog I/O Module
المنتج الحالي
حاضِر
بائع:
GE Fanuc
GE Fanuc|IS215UCCAM03A|Analog I/O Module
سعر عادي
$160.00
سعر البيع
$160.00
سعر عادي
$312.00
خيارات
الأوصاف
GE Fanuc IS215UCCAM03A Analog I/O Module
Description
The GE Fanuc IS215UCCAM03A is an analog input/output module designed for use in GE’s Mark V turbine control systems.
Features
- Supports multiple analog signal types
- Interfaces with terminal boards via standardized connectors
- Configurable via onboard hardware jumpers
Technical Specifications
- Manufacturer: GE Fanuc
- Model Number: IS215UCCAM03A
- Series: Mark V
- Module Type: Analog I/O (TCQA board)
- Signal Types Handled: LVDT inputs, servo valve outputs, thermocouple inputs, 4–20 mA inputs/outputs, vibration inputs, relay driver outputs, pulse inputs, voltage inputs, generator and line signals
-
Connector Interfaces:
- 3PL: Data bus linking STCA, TCQA, and TCQE boards
- JE: Transfers generator/line signals and servo valve outputs to/from TCQC board
- JB: Carries 4–20 mA signals to/from TBQC terminal board
- JF: Receives LVDT/LVDR position inputs from TBQC JFR
- JG: Accepts ±10 V DC and vibration inputs from TBQB JGR
-
Jumper Configurations:
- J1/J2: Select milliamp output circuit
- J5/J6: Set output current range (20 mA or 200 mA)
- J7: Enable RS232 port for board testing
- J8: Activate oscillator
