GE Fanuc|IC695CPL410-AAAC|CPE310 Controller
The IC695CPL410-AAAC is a CPU module in the GE Fanuc PACSystem RX3i Series, designed to perform real-time control of machines, processes, and material handling systems. It communicates with I/O and Intelligent Option modules over a dual-purpose PCI and serial backplane.
- Processor: 1.1 GHz Atom processor
- Memory: 10 MB
- Embedded Ethernet: Two connections rated for 10Mb/sec and 100Mb/sec
- Serial Ports: RS-485 and RS-232
- Program Blocks: Up to 512 blocks, each up to 128 KB
- Supported Protocols: Modbus RTU Slave, SNP, Serial I/O
- Programming Languages: Ladder Diagram, Structured Text, C, Function Block Diagram
- LED Indicators: Green, red, off, or blinking for efficient troubleshooting and status verification
- Installation: Can be installed in any pair of slots in the main RX3i controller rack except for the two highest-numbered slots
- Upgrade: Approximately three times faster than the 300 MHz Celeron processor in the IC695CPU310; legacy PME software compatible
- Note: The RS-232 port on the IC695CPE310 does not provide 5V power on pin 5
Technical Specifications
- Processing Speed: 1.1 GHz
- CPU Memory: 10 MB
- Floating Point: Yes
-
Power Requirements:
- 3.3 VDC: 1 Amp
- 5 VDC: 1 Amp
- 24 VDC: 0.5 Amp
-
Serial Protocols:
- Modbus RTU Slave
- SNP Slave
- Serial I/O
-
Embedded Communications:
- RS-232
- RS-485
- Real-Time Clock: Battery-backed with dynamic data backup
- USB Interface: 1x USB-A 2.0 master port for configuration and application data download
- Ethernet Connections: 2 ports, 10/100 Mbps
-
Environmental:
- Operating Temperature: 0 to 60°C (32 to 140°F)
Installation and Usage
- Backplane: Must be installed in the central universal backplane of the RX3i PACSystems machine control system
- Unsupported Backplanes: Cannot function properly if installed in an expansion backplane or a remote backplane
GE Fanuc|IC695CPL410-AAAC|CPE310 Controller
المنتج الحالي
حاضِر
بائع:
GE Fanuc
GE Fanuc|IC695CPL410-AAAC|CPE310 Controller
سعر عادي
$160.00
سعر البيع
$160.00
سعر عادي
$312.00
خيارات
الأوصاف
The IC695CPL410-AAAC is a CPU module in the GE Fanuc PACSystem RX3i Series, designed to perform real-time control of machines, processes, and material handling systems. It communicates with I/O and Intelligent Option modules over a dual-purpose PCI and serial backplane.
- Processor: 1.1 GHz Atom processor
- Memory: 10 MB
- Embedded Ethernet: Two connections rated for 10Mb/sec and 100Mb/sec
- Serial Ports: RS-485 and RS-232
- Program Blocks: Up to 512 blocks, each up to 128 KB
- Supported Protocols: Modbus RTU Slave, SNP, Serial I/O
- Programming Languages: Ladder Diagram, Structured Text, C, Function Block Diagram
- LED Indicators: Green, red, off, or blinking for efficient troubleshooting and status verification
- Installation: Can be installed in any pair of slots in the main RX3i controller rack except for the two highest-numbered slots
- Upgrade: Approximately three times faster than the 300 MHz Celeron processor in the IC695CPU310; legacy PME software compatible
- Note: The RS-232 port on the IC695CPE310 does not provide 5V power on pin 5
Technical Specifications
- Processing Speed: 1.1 GHz
- CPU Memory: 10 MB
- Floating Point: Yes
-
Power Requirements:
- 3.3 VDC: 1 Amp
- 5 VDC: 1 Amp
- 24 VDC: 0.5 Amp
-
Serial Protocols:
- Modbus RTU Slave
- SNP Slave
- Serial I/O
-
Embedded Communications:
- RS-232
- RS-485
- Real-Time Clock: Battery-backed with dynamic data backup
- USB Interface: 1x USB-A 2.0 master port for configuration and application data download
- Ethernet Connections: 2 ports, 10/100 Mbps
-
Environmental:
- Operating Temperature: 0 to 60°C (32 to 140°F)
Installation and Usage
- Backplane: Must be installed in the central universal backplane of the RX3i PACSystems machine control system
- Unsupported Backplanes: Cannot function properly if installed in an expansion backplane or a remote backplane
