Bently Nevada|330706-005-046-10-02-05|Dual-Channel Proximitor Sensor
Bently Nevada 330706-005-046-10-02-05 Dual Proximitor Sensor
Description
The Bently Nevada 330706-005-046-10-02-05 is a dual-channel Proximitor sensor designed for high-precision non-contact measurements of shaft vibration and displacement in industrial machinery.
Features
- Supports simultaneous measurement from two proximity probes
- Enhanced RFI/EMI immunity
- Compact design suitable for DIN-rail or panel mounting
- Robust against electrostatic discharge
- Easy installation with SpringLoc terminal strips
Technical Specifications
-
Electrical Characteristics
- Power Supply: Requires -17.5 Vdc to -26 Vdc, consuming up to 12 mA
- Sensitivity: 3.94 V/mm (100 mV/mil) ±10% including interchangeability error
- Output Resistance: 50 Ω
- Linear Range: 4.0 mm (160 mils), starting approximately 0.5 mm (20 mils) from target
-
Probe Specifications
- DC Resistance: For probe length 1.0m, 5.9 ± 0.5 ohms; for 5.0m, 7.2 ± 0.8 ohms; for 9.0m, 8.5 ± 1.1 ohms
- Cable Capacitance: Typical value of 69.9 pF/m (21.3 pF/ft)
- Recommended Gap Setting: 2.5 mm (100 mils)
-
Environmental Conditions
- Operating Temperature: Between 0°C to +45°C (+32°F to +113°F) at altitudes up to 2000m
- Storage Temperature: Can operate within -35°C to +120°C (-31°F to +248°F) range with specified performance variations
- Humidity: Suitable for use in environments with up to 95% non-condensing humidity
-
Performance Over Extended Temperatures
- Incremental Scale Factor remains within ±25% of 3.94 V/mm over the temperature range
- Deviation from Straight Line stays within ±0.51 mm across extreme temperatures
-
Frequency Response
- Operates effectively from 0 to 8 kHz with typical +0, -3 dB response
-
Physical Properties
- Probe Tip Material: Polyphenylene sulfide (PPS)
- Case Material: AISI 304 stainless steel
- Tensile Strength: Maximum rated at 330 N (75 pounds) for probe case to probe lead connections
- Weight: Approximately 70 g (2.5 oz) for minimum length case without armor
Bently Nevada|330706-005-046-10-02-05|Dual-Channel Proximitor Sensor
Bently Nevada|330706-005-046-10-02-05|Dual-Channel Proximitor Sensor
Bently Nevada 330706-005-046-10-02-05 Dual Proximitor Sensor
Description
The Bently Nevada 330706-005-046-10-02-05 is a dual-channel Proximitor sensor designed for high-precision non-contact measurements of shaft vibration and displacement in industrial machinery.
Features
- Supports simultaneous measurement from two proximity probes
- Enhanced RFI/EMI immunity
- Compact design suitable for DIN-rail or panel mounting
- Robust against electrostatic discharge
- Easy installation with SpringLoc terminal strips
Technical Specifications
-
Electrical Characteristics
- Power Supply: Requires -17.5 Vdc to -26 Vdc, consuming up to 12 mA
- Sensitivity: 3.94 V/mm (100 mV/mil) ±10% including interchangeability error
- Output Resistance: 50 Ω
- Linear Range: 4.0 mm (160 mils), starting approximately 0.5 mm (20 mils) from target
-
Probe Specifications
- DC Resistance: For probe length 1.0m, 5.9 ± 0.5 ohms; for 5.0m, 7.2 ± 0.8 ohms; for 9.0m, 8.5 ± 1.1 ohms
- Cable Capacitance: Typical value of 69.9 pF/m (21.3 pF/ft)
- Recommended Gap Setting: 2.5 mm (100 mils)
-
Environmental Conditions
- Operating Temperature: Between 0°C to +45°C (+32°F to +113°F) at altitudes up to 2000m
- Storage Temperature: Can operate within -35°C to +120°C (-31°F to +248°F) range with specified performance variations
- Humidity: Suitable for use in environments with up to 95% non-condensing humidity
-
Performance Over Extended Temperatures
- Incremental Scale Factor remains within ±25% of 3.94 V/mm over the temperature range
- Deviation from Straight Line stays within ±0.51 mm across extreme temperatures
-
Frequency Response
- Operates effectively from 0 to 8 kHz with typical +0, -3 dB response
-
Physical Properties
- Probe Tip Material: Polyphenylene sulfide (PPS)
- Case Material: AISI 304 stainless steel
- Tensile Strength: Maximum rated at 330 N (75 pounds) for probe case to probe lead connections
- Weight: Approximately 70 g (2.5 oz) for minimum length case without armor
